According to the U.S. Patent and Trademark Office, Apple has filed a patent for an “Electronic accessory device.” It describes a “thin” accessory that contains traditional laptop hardware like a large display, physical keyboard, GPU, ports and more — all of which is powered by an iPhone or iPad. The device powering the hardware would fit into a slot built into the accessory. AppleInsider reports: While the accessory can take many forms, the document for the most part remains limited in scope to housings that mimic laptop form factors. In some embodiments, for example, the accessory includes a port shaped to accommodate a host iPhone or iPad. Located in the base portion, this slot might also incorporate a communications interface and a means of power transfer, perhaps Lightning or a Smart Connector. Alternatively, a host device might transfer data and commands to the accessory via Wi-Fi, Bluetooth or other wireless protocol. Onboard memory modules would further extend an iOS device’s capabilities. Though the document fails to delve into details, accessory memory would presumably allow an iPhone or iPad to write and read app data. In other cases, a secondary operating system or firmware might be installed to imitate a laptop environment or store laptop-ready versions of iOS apps. In addition to crunching numbers, a host device might also double as a touch input. For example, an iPhone positioned below the accessory’s keyboard can serve as the unit’s multitouch touchpad, complete with Force Touch input and haptic feedback. Coincidentally, the surface area of a 5.5-inch iPhone 7 Plus is very similar to that of the enlarged trackpad on Apple’s new MacBook Pro models. Some embodiments also allow for the accessory to carry an internal GPU, helping a host device power the larger display or facilitate graphics rendering not possible on iPhone or iPad alone. Since the accessory is technically powered by iOS, its built-in display is touch-capable, an oft-requested feature for Mac. Alternatively, certain embodiments have an iPad serving as the accessory’s screen, with keyboard, memory, GPU and other operating guts located in the attached base portion. This latter design resembles a beefed up version of Apple’s Smart Case for iPad.
Read more of this story at Slashdot.